Power Tech System
Sola, Ahmedabad, Gujarat
GST No. 24AKUPP1158Q1ZB
TrustSEAL Verified
Call 0804861149964% Response Rate
SEND EMAIL
Product Details:
| Output Voltage | Output signal from the encoder. Open collector: max. output DC24V 50mA |
| Design | Vibration:Vibration |
| Brand | Delta |
| Input Voltage | power source DC 5 ~ 24V,as to details please refer to table of terminals descriptions. |
| Model Name/Number | EME-PG01 Encoder fedback card |
| Installation Type | Below 1000m |
Encoder Feedback Card: The optional encoder feedback card provides closed loop vector control, as well as, frequency or speed commands with pulse train input. The card allows you to control speed fluctuation caused by motor slip. This accessory is available in Delta’s VFD-VE, VFD-B and VFD-E series.
EME-PG01 Encoder feedback card used on the VFD-E series
Additional Information:
Product Details:
| Current | Encoder signal input Support Heidenhain ERN1387 encoder Heidenhain EnDat 2.1 SICK HIPERFACE |
| Output Voltage | sutable for Heidenhain ERN 1387 Encoder Signal |
| Design | Push-pull pulse output signal Maximum output frequency: 50 kHz |
| Brand | delta |
| Input Voltage | Port for voltage input (for adjusting the value of voltage amplitude from push-pull pulse output) Ma |
Additional Information:
Product Details:
| Current | Suitable for Heidenhain ECN 1313 encoder signal |
| Output Voltage | 5V/8V |
| Design | Multilayer Printed Circuit Board (PCB) |
| Brand | Delta |
| Input Voltage | Port for voltage input (for adjusting the value of voltage amplitude from push-pull pulse output) Ma |
| Support OS | Sutable for Delta Elevator drives VFD-ED |
Additional Information:
Product Details:
| Current | Absolute encoder signal input (differential motion,voltage,push-pull,open collector) Note: Differ |
| Output Voltage | Output signal of the push-pull frequency divider Factory setting: Output amplitude is about +24 V. U |
| Design | Incremental encoder signal input (differential motion,voltage,push-pull,open collector) Note: Dif |
| Input Voltage | Power output of encoder Note: Use SW1 to set up output voltage Voltage: +5 V +- 0.5 V or +12 V+-1 V Cu |
| No. Of Ports | Port for voltage input,to adjust the amplitude of output voltage at terminal A/O and terminal B/O. |
| Support OS | Supports open collector,differential,UVW signal and frequency divider output |
Additional Information:
Product Details:
| Usage/Application | Power source of EMV-PG01X (use PS1 to switch 12V/5V) Output Voltage: +5V/+12V+-5% 200mA |
| Shaft Type | A1,-A1 B1,-B1 Z1-Z1:A1:Input signal. Input type is selected by ABZ1. It can be 1-phase or 2-phase in |
EMV-PG01X VFD-VE Encoder feedback card (no pulse output terminal)
Additional Information:
Product Details:
| Usage/Application | For Encoder feedback |
Additional Information:
Additional Information:
Product Details:
| Brand | delta |
| Usage/Application | Resoiver Card For Delta VFD-C2000 |
| Model Name/Number | EMC-PG01R |
| Size/Dimension | R1- R2 :Resolver output power 7 Vrms,10 kHz |
| Current Consumption | S1,S2,S3,S4: Resolver input signal 3.5 +- 0.175 Vrms,10 kHz |
| Frequence | PG OUT:PG card output signals. Division frequency function: 1 ~ 255 times |
| Material | PG Output:Max. output voltage for Line driver: 5 VDC |
| Max Pressure | PG output:Max Output current 50mA |
Product Details:
| Usage/Application | VP:Power source of EMV-PG01O (use PS1 to switch 12V/5V) Output Voltage: +5V/+12V+-5% 200mA |
| Current | A1 -A1,B1,-B1 Z1,-Z1 :Input signal from encoder. Input type is selected by ABZ1. It can be 1-phase |
| Shaft Type | A2,-A2 B2,-B2 :Input signal from encoder. Input type is selected by AB2. It can be 1-phase or 2-pha |
| Brand | Delta |
Additional Information:
Product Details:
| Brand | delta |
| Usage/Application | Universal Type PG feedback card for VFD-C2000 |
| Model Name/Number | EMC-PG01U universal encoder card |
| Size/Dimension | A1,- A1,B1,-B1 Z1,-Z1:Encoder input signal (Line Driver) 1-phase or 2-phase input. Max. input |
| Current Consumption | Encoder input signal (Line Driver) 1-phase or 2-phase input. Max. input |
| Frequence | VP:Output voltage for power: +5 V / +12 V +- 5% (use FSW3 to switch +5 V / +12 V) Max. output curren |
Additional Information:
Product Details:
| Brand | Delta |
| Usage/Application | Linedriver (ABZ+UVW |
Product Details:
| Brand | Delta |
| Model Name/Number | EMVL-PGH01 |
Additional Information:
Product Details:
| Current | A1,-A1 B1,-B1 Z1,-Z1:Input signal. Input type is selected by ABZ1. It can be 1-phase or 2-phase inp |
| Output Voltage | A2,-A2 B2,-B2:Input signal. Input type is selected by AB2. It can be 1-phase or 2-phase input. Maxi |
| Design | AO,-AO,BO,-BO ZO,-ZO:Output signal. It has division frequency function (Pr.10-16),Line driver: max |
| Brand | Delta |
| Input Voltage | Power source of EMV-PG01L Output Voltage: +5V+-5% 200mA |
Additional Information:
Product Details:
| Brand | Delta |
| Output Power | VP:EMC-PG01L Encoder Feedback Card,Line Driver; VFD-C,CP |
| Usage/Application | Open collector input: +5 V / +24 V (Note1) |
| Input Voltage | Encoder input signal: (Line Driver) |
| Model Name/Number | EMC-PG01L |
| Size/Dimension | Input:1-phase or 2-phase input |
| Output Current | Max. input frequency: EMC-PG01L: 300KHz; EMC-PG02L: 30KHz |
Additional Information: