Power Tech System
Sola, Ahmedabad, Gujarat
GST No. 24AKUPP1158Q1ZB
TrustSEAL Verified
Call 08048611499 68% Response Rate
SEND EMAIL
Product Details:
| Power Rating | 0.5 HP TO 475 HP |
| Brand | Delta |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD007V43A-2 |
| Output Power | 0.75KW/1HP |
| Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
| Input Frequency | 47 ~ 63 Hz |
| Output Current | 3.0 Amp |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Installation Type | NEMA 1/IP 20 Indoor use only |
| Acceleration Time | 0~600 Sec |
| Warranty | 12 Months |
| Ambient Temp. | -10 C to 50 C for 10 HP and below,-10 C to 40 C for 15 HP and above |
Product Details:
| Power Rating | 0.5 HP TO 475 HP |
| Brand | Delta |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD022V43A-2 |
| Output Power | 2.2KW/3 HP |
| Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
| Input Frequency | 47~63 HZ |
| Output Current | 6 Amp |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Installation Type | NEMA 1/IP 20 Indoor use only |
| Warranty | 12 Months |
| Ambient Temp. | -10 C to 50 C for 10 HP and below,-10 C to 40 C for 15 HP and above |
Product Details:
| Power Rating | 0.5 HP TO 475 HP |
| Brand | Delta |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD037V43A-2 |
| Output Power | 3.7KW/5HP |
| Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
| Input Frequency | 47~63 HZ |
| Output Current | 8.5 Amp |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Installation Type | NEMA 1/IP 20 Indoor use only |
| Acceleration Time | 0~600 Sec |
| Warranty | 12 Months |
| Ambient Temp. | -10 C to 50 C for 10 HP and below,-10 C to 40 C for 15 HP and above |
Product Details:
| Power Rating | 0.5 HP TO 475 HP |
| Brand | Delta |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD015V43A-2 |
| Output Power | 1.5KW/2 HP |
| Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
| Input Frequency | 47 ~ 63 Hz |
| Output Current | 4.2 Amp |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Installation Type | NEMA 1/IP 20 Indoor use only |
| Acceleration Time | 0~600 Sec |
| Warranty | 12 Months |
| Ambient Temp. | -10 C to 50 C for 10 HP and below,-10 C to 40 C for 15 HP and above |
Product Details:
| Power Rating | 0.5 HP TO 475 HP |
| Brand | Delta |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD055V43A-2 |
| Output Power | 5.5KW/7.5HP |
| Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
| Input Frequency | 47 ~ 63 Hz |
| Output Current | 13 Amp |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | 50 Deg C for 10 HP and below |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Power Rating | 0.5 HP TO 475 HP |
| Brand | Delta |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD075V43A-2 |
| Output Power | 7.5KW/10HP |
| Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
| Input Frequency | 47 ~ 63 Hz |
| Output Current | 18 Amp |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | 50 Deg C for 10 HP |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 11KW/15HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD110V43A-2 |
| Output Current | 24 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 15KW/20HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD150V43A-2 |
| Output Current | 32 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 18.5KW/25HP |
| Input Voltage | 380 V ~ 480 V |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD185V43A-2 |
| Output Current | 38 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 22KW/30HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD220V43A-2 |
| Output Current | 45 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 30KW/40HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD300V43A-2 |
| Output Current | 60 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 37KW/50HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD370V43A-2 |
| Output Current | 73 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 45KW/60HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD450V43A-2 |
| Output Current | 91 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 55KW/75HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD550V43A-2 |
| Output Current | 110 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |
Product Details:
| Brand | Delta |
| Output Power | 75KW/100HP |
| Input Voltage | 380 V ~ 480 V ( -10% ~ +10%) |
| Input Phase | 3 - Phase |
| Model Name/Number | VFD750V43A-2 |
| Output Current | 150 Amp |
| Input Frequency | 47 ~ 63 Hz |
| Start Up Torque | 150% at 0.5 HZ and 0 HZ (with FOC +PG Control Mode) |
| Control Procedure | SPWM (sinusoidal Pulse Width Modulation) |
| Ambient Temp. | -10 Deg C to 50 C for 10 HP and below,-10 Deg C to 40 C for 15 HP and above |
| Installation Type | NEMA 1 / IP 20 Indoor use only |
| Application | Transmission Device,Crane,Elevators,CNC machine Center,Extrusion Molding,Injection molding,Storage |